LiPro1-1 V2

SKU: BG095
GTIN: 4260532950082
HAN: ST020
Category: LiPro
Manufacturers: ECS

LiPro1-1 LiFeYPO4 V2

The name LiPro stands for Lithium Protection. This module protects your valuable LiFeYPO4 cells. It provides protection against both deep discharge and overcharging, and a balancer circuit is also implemented.

28,56 €

incl. 19% VAT , plus

Old price: 40,13 €

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

LiPro1-1 LiFeYPO4 V2

New in the V2 version:

Stronger switching outputs (up to 1 A)
Programmable temperature compensation of the switching outputs
Faster wiring possible via optional ribbon cable
Thanks to a wider voltage range, now also suitable for other cell types (e.g. for lithium titanate (LTO))

The LiPro1-1 V2 module protects your valuable LiFeYPO4 cells. The module continuously monitors the cell voltage; as soon as the cell voltage becomes too low, the 1st safety loop opens for deep-discharge protection. The safety loop is routed through all LiPro1-1 modules and then to a relay that switches off the load. The module has a second safety loop to protect against overcharging. As soon as the limit voltage is exceeded on any module, the 2nd safety loop opens, which in turn switches off a relay. This relay switches off e.g. the charger. In photovoltaic systems, the connection between the solar cells and the charge controller can also be interrupted. If the LiPro1-1 V2 is operated together with our greenController, it can evaluate both safety loops directly. No further relays are then required.

Furthermore, temperature monitoring is provided. At temperatures above +80 °C both safety loops are switched off. The LiPro1-1 module also contains a balancer that diverts the charge current past the cell once the balancing voltage is reached. Load relays can be ordered from us as accessories. Other voltages available on request.

Features:

Microprocessor-controlled
One module per cell
Mounted directly on the positive battery terminal
Balancer current approx. 0 – 1 A
Balancer voltage 3,65 V
Deep-discharge protection (LVP1, delayed) at 2,8 V
Deep-discharge protection (LVP2, instant) at 2,6 V
Delayed response to prevent an LVP1 trip during brief high inrush current or with cold cells
Overcharge protection (OVP) at 3,9 V
4 LEDs to indicate: function, error, LVP, UVP
Over-temperature protection 60 °C
Maximum tolerance of the limit values less than 0,5 %!
Low power consumption (<20 mW)

BMS specifically for LiFeYPO4 cells (e.g. Winston). For other cell types please order the RS485 version, where you can change the parameters for the cells.

Accessories for this item: